#if defined(NOMPIR8) /* LAM does not support mpi_real[48] */
# define MTYPE4 mpi_real
#else /* most MPI's allow mpi_real[48] */
# define MTYPE4 mpi_real4
#endif

c
c-----------------------------------------------------------------------
c
c         machine dependent I/O routines.
c         MPI-2 I/O version, with I/O from first processor in each row.
c         contained in module mod_za.
c
c         author:  Alan J. Wallcraft,  NRL.
c         amended: for dynamic storage allocation by  Dan Moore, QinetiQ
c                  July 2009
c
c-----------------------------------------------------------------------
c
      subroutine zagetc(cline,ios, iunit)
      implicit none
c
      character*80, intent(out)   :: cline
      integer,      intent(out)   :: ios
      integer,      intent(in)    :: iunit
c
c**********
c*
c  1) machine specific routine for reading one text line from a file.
c
c  2) The read is performed on the first processor only.
c*
c**********
c
      integer        iline,ibuf
      common/czgetc/ iline(81,0:1),ibuf
      save  /czgetc/
c
      integer i
c
c --- I/O from first processor only
c
      ibuf = mod(ibuf+1,2)
c
      if     (mnproc.eq.1) then
        read(iunit,'(a)',iostat=ios) cline
        do i= 1,80
          iline(i,ibuf) = ichar(cline(i:i))
        enddo
        iline(81,ibuf) = ios
      endif
c
c     broadcast to all other processors
c
      call xcgetc(iline(:,ibuf))
      do i= 1,80
        cline(i:i) = char(iline(i,ibuf))
      enddo
      ios = iline(81,ibuf)  ! iostat value
      return
      end subroutine zagetc

      subroutine zaiopn(cstat, iaunit)
      implicit none
c
      integer,       intent(in)    :: iaunit
      character*(*), intent(in)    :: cstat
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for opening a file for array i/o.
c
c     must call zaiost before first call to zaiopn.
c     see also 'zaiope' and 'zaiopf'.
c
c  2) the filename is taken from the environment variable FORxxxA,
c       where xxx = iaunit, with default fort.xxxa.
c
c     array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     cstat indicates the file type, it can be 'scratch', 'old', or
c      'new'.
c     all i/o to iaunit must be performed by zaiord and zaiowr.
c     the file should be closed using zaiocl.
c*
c**********
c
c --- spval  = data void marker, 2^100 or about 1.2676506e30
c --- n2drec = size of output 2-d array, multiple of 4096
      real*4     spval
      parameter (spval=2.0**100)
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/

      integer(kind=mpi_offset_kind) disp
      integer                       iamode,iahint
      character                     cfile*256,cenv*7

#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
c     test file state.
c
      if     (iarec(iaunit).ne.-1) then
        write(lp,9000) iaunit
        call xcstop('(zaiopn)')
               stop '(zaiopn)'
      endif
c
      iarec(iaunit) = 0
c
c --- I/O from first processor in each row.
c
      if     (mproc.eq.mp_1st) then
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiopn - iaunit = ',iaunit
*     call flush(lp)
*     endif
c
c     get filename.
c
      write(cenv,"('FOR',i3.3,'A')") iaunit
      cfile = ' '
      call getenv(cenv,cfile)
      if     (cfile.eq.' ') then
        write(cfile,"('fort.',i3.3,'a')") iaunit
      endif
c
c     open file.
c
      if     (cstat.eq.'OLD' .or.
     &        cstat.eq.'old'     ) then
        iamode = MPI_MODE_RDONLY +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiord  !see zaiost
        file_count_zaiord = file_count_zaiord + 1
      elseif (cstat.eq.'NEW' .or.
     &        cstat.eq.'new'     ) then
        iamode = MPI_MODE_WRONLY +
     &           MPI_MODE_CREATE +
     &           MPI_MODE_EXCL   +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
      else !scratch file
        iamode = MPI_MODE_RDWR            +
     &           MPI_MODE_DELETE_ON_CLOSE +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
      endif
      call mpi_file_open(group_1st_in_row,
     &                   trim(cfile),
     &                   iamode,
     &                   iahint,
     &                   iahand(iaunit),
     &                   mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit
        write(lp,*) 'mpi_file_open - mpierr = ',mpierr
        call flush(lp)
        call xchalt('(zaiopn)')
               stop '(zaiopn)'
      endif !mpierr
      disp = 0
      call mpi_file_set_view(iahand(iaunit),
     &                       disp,
     &                       MTYPE4,
     &                       MTYPE4,
     &                       "native",  !1st convert to big-endian if necessary
     &                       iahint,
     &                       mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit
        write(lp,*) 'mpi_file_set_view - mpierr = ',mpierr
        call flush(lp)
        call xchalt('(zaiopn)')
               stop '(zaiopn)'
      endif !mpierr
c
      endif  ! I/O from first processor in each row
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif

      return
c
 9000 format(/ /10x,'error in zaiopn -  array I/O unit ',
     &   i3,' is not marked as available.'/ /)
 9100 format(/ /10x,'error in zaiopn -  can''t open unit ',i3,
     &   ', for array I/O.'/ /)
      end subroutine zaiopn

      subroutine zaiope(cenv,cstat, iaunit)
      implicit none
c
      integer,       intent(in)    :: iaunit
      character*(*), intent(in)    :: cenv,cstat
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for opening a file for array i/o.
c
c     must call zaiost before first call to zaiope.
c     see also 'zaiopn' and 'zaiopf'.
c
c  2) the filename is taken from environment variable 'cenv'.
c
c     array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     cstat indicates the file type, it can be 'scratch', 'old', or
c      'new'.
c     all i/o to iaunit must be performed by zaiord and zaiowr.
c      arrays passed to these routines must conform to 'h'.
c     the file should be closed using zaiocl.
c*
c**********
c
c --- spval  = data void marker, 2^100 or about 1.2676506e30
c --- n2drec = size of output 2-d array, multiple of 4096
c
      real*4     spval
      parameter (spval=2.0**100)

      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
c
      integer(kind=mpi_offset_kind) disp
      integer                       iamode,iahint
      character                     cfile*256

c
#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
c     test file state.
c
      if     (iarec(iaunit).ne.-1) then
        write(lp,9000) iaunit
        call xcstop('(zaiope)')
               stop '(zaiope)'
      endif
c
      iarec(iaunit) = 0
c
c --- I/O from first processor in each row.
c
      if     (mproc.eq.mp_1st) then
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiope - iaunit = ',iaunit
*     call flush(lp)
*     endif
c
c     get filename.
c
      cfile = ' '
      call getenv(cenv,cfile)
      if     (cfile.eq.' ') then
        write(lp,9300) trim(cenv)
        write(lp,*) 'iaunit = ',iaunit
        call flush(lp)
        call xchalt('(zaiope)')
               stop '(zaiope)'
      endif
c
c     open file.
c
      if     (cstat.eq.'OLD' .or.
     &        cstat.eq.'old'     ) then
        iamode = MPI_MODE_RDONLY +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiord  !see zaiost
        file_count_zaiord = file_count_zaiord + 1
      elseif (cstat.eq.'NEW' .or.
     &        cstat.eq.'new'     ) then
        iamode = MPI_MODE_WRONLY +
     &           MPI_MODE_CREATE +
     &           MPI_MODE_EXCL   +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
      else !scratch file
        iamode = MPI_MODE_RDWR            +
     &           MPI_MODE_DELETE_ON_CLOSE +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
      endif
      call mpi_file_open(group_1st_in_row,
     &                   trim(cfile),
     &                   iamode,
     &                   iahint,
     &                   iahand(iaunit),
     &                   mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit,trim(cfile)
        write(lp,*) 'mpi_file_open - mpierr = ',mpierr
        write(lp,*) 'cenv = ',trim(cenv)
        call flush(lp)
        call xchalt('(zaiope)')
               stop '(zaiope)'
      endif !mpierr
      disp = 0
      call mpi_file_set_view(iahand(iaunit),
     &                       disp,
     &                       MTYPE4,
     &                       MTYPE4,
     &                       "native",  !1st convert to big-endian if necessary
     &                       iahint,
     &                       mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit,trim(cfile)
        write(lp,*) 'mpi_file_set_view - mpierr = ',mpierr
        write(lp,*) 'cenv = ',trim(cenv)
        call flush(lp)
        call xchalt('(zaiope)')
               stop '(zaiope)'
      endif !mpierr
c
      endif  ! I/O from first processor in each row
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif

      return
c
 9000 format(/ /10x,'error in zaiope -  array I/O unit ',
     &   i3,' is not marked as available.'/ /)
 9100 format(/ /10x,'error in zaiope -  can''t open unit ',i3,
     &   ', for array I/O.' /
     &   10x,'cfile = ',a/ /)
 9300 format(/ /10x,'error in zaiope -  environment variable ',a,
     &   ' not defined'/ /)
      end subroutine zaiope

      subroutine zaiopf(cfile,cstat, iaunit)
      implicit none
c
      integer,       intent(in)    :: iaunit
      character*(*), intent(in)    :: cfile,cstat
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for opening a file for array i/o.
c
c     must call zaiost before first call to zaiopf.
c     see also 'zaiopn' and 'zaiope'.
c
c  2) the filename is taken from 'cfile'.
c
c     array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     cstat indicates the file type, it can be 'scratch', 'old', or
c      'new'.
c     all i/o to iaunit must be performed by zaiord and zaiowr.
c      arrays passed to these routines must conform to 'h'.
c     the file should be closed using zaiocl.
c*
c**********
c
c --- spval  = data void marker, 2^100 or about 1.2676506e30
c --- n2drec = size of output 2-d array, multiple of 4096
c
      real*4     spval
      parameter (spval=2.0**100)
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
c
      integer(kind=mpi_offset_kind) disp
      integer                       iamode,iahint
      logical                       lphint


#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
c     test file state.
c
      if     (iarec(iaunit).ne.-1) then
        write(lp,9000) iaunit
        call xcstop('(zaiopf)')
               stop '(zaiopf)'
      endif
c
      iarec(iaunit) = 0
c
c --- I/O from first processor in each row.
c
      if     (mproc.eq.mp_1st) then
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiopf - iaunit = ',iaunit
*     call flush(lp)
*     endif
c
c     open file.
c
      if     (cstat.eq.'OLD' .or.
     &        cstat.eq.'old'     ) then
        iamode = MPI_MODE_RDONLY +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiord  !see zaiost
        file_count_zaiord = file_count_zaiord + 1
        lphint = file_count_zaiord .eq. 1
      elseif (cstat.eq.'NEW' .or.
     &        cstat.eq.'new'     ) then
        iamode = MPI_MODE_WRONLY +
     &           MPI_MODE_CREATE +
     &           MPI_MODE_EXCL   +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
        lphint = file_count_zaiowr .eq. 1
      else !scratch file
        iamode = MPI_MODE_RDWR            +
     &           MPI_MODE_DELETE_ON_CLOSE +
     &           MPI_MODE_UNIQUE_OPEN
        iahint = file_info_zaiowr  !see zaiost
        file_count_zaiowr = file_count_zaiowr + 1
        lphint = .true.
      endif
      call mpi_file_open(group_1st_in_row,
     &                   trim(cfile),
     &                   iamode,
     &                   iahint,
     &                   iahand(iaunit),
     &                   mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit,trim(cfile)
        write(lp,*) 'mpi_file_open - mpierr = ',mpierr
        call flush(lp)
        call xchalt('(zaiopf)')
               stop '(zaiopf)'
      endif !mpierr
      disp = 0
      call mpi_file_set_view(iahand(iaunit),
     &                       disp,
     &                       MTYPE4,
     &                       MTYPE4,
     &                       "native",  !1st convert to big-endian if necessary
     &                       iahint,
     &                       mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iaunit,trim(cfile)
        write(lp,*) 'mpi_file_set_view - mpierr = ',mpierr
        call flush(lp)
        call xchalt('(zaiopf)')
               stop '(zaiopf)'
      endif !mpierr
      if     (lphint .and. mnproc.eq.1) then
        call zaio_hints(iahand(iaunit))
      endif
c
      endif  ! I/O from first processor in each row
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif

      return
c
 9000 format(/ /10x,'error in zaiopf -  array I/O unit ',
     &   i3,' is not marked as available.'/ /)
 9100 format(/ /10x,'error in zaiopf -  can''t open unit ',i3,
     &   ', for array I/O.' /
     &   10x,'cfile = ',a/ /)
      end subroutine zaiopf

      subroutine zaio_hints(file_handle)
      implicit none
c
      integer, intent(in) :: file_handle
c
c**********
c*
c  1) prints current hints.
c*
c**********
c
      logical       flag
      integer       hints,i,mpierr,nkeys
      character*256 key,value
c
      call MPI_File_get_info(file_handle, hints, mpierr)
      call MPI_Info_get_nkeys(hints, nkeys, mpierr)
c
      write(lp,"(/a)") 'zaio_hints:'
      do i= 0,nkeys-1
        call MPI_Info_get_nthkey(hints, i, key, mpierr)
        call MPI_Info_get(hints, key, 256, value, flag, mpierr)
        write(lp,"(4a)")
     &    '    key=',trim(key),
     &    '  value=',trim(value)
      enddo
      write(lp,*)
      call flush(lp)
      return
      end subroutine zaio_hints

      subroutine zaiopi(lopen, iaunit)
      implicit none
c
      logical, intent(out)   :: lopen
      integer, intent(in)    :: iaunit
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) is an array i/o unit open?
c
c  2) must call zaiost before first call to zaiopi.
c*
c**********
c
      lopen = iarec(iaunit).ne.-1
      return
      end subroutine zaiopi

      subroutine zaiost
      implicit none
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for initializing array i/o.
c
c  2) see also zaiopn, zaiord, zaiowr, and zaiocl.
c*
c**********
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
c
      integer       i,Alloc_Stat,iwsize
      character*256 value
c
c     mpi-2 hints for array i/o
c
      file_count_zaiord = 0
      file_count_zaiowr = 0
      call mpi_info_create(file_info_zaiord,
     &                     mpierr)
      call mpi_info_create(file_info_zaiowr,
     &                     mpierr)
#if defined(AIX)
      call mpi_info_set(file_info_zaiord,
     &                  'IBM_largeblock_io',  !read on calling task
     &                  'true',
     &                  mpierr)
      write(value,'(i10)') (((itdm*jtdm+4095)/4096)*4096)*4
      call mpi_info_set(file_info_zaiowr,
     &                  'IBM_io_buffer_size',
     &                  trim(value),          !write from a single task
     &                  mpierr)
#else
      call mpi_info_free(file_info_zaiord,  !set to mpi_info_null
     &                   mpierr)
      call mpi_info_free(file_info_zaiowr,  !set to mpi_info_null
     &                   mpierr)
#endif
c
      if     (mnproc.eq.1) then
        write(lp,'(/a/)')
     &    'zaiost - Array I/O is MPI-2 I/O from one task per row'
      endif
c
      do i= 1,999
        iarec(i) = -1
      enddo
C==================================================================
C  Patch for Allocatable Version
C  Dan Moore, QinetiQ,  July 2009
C  Allocate various arrays needed for MPI I/O dynamically
c  I/O is done on arrays sized to match each tile.
C------------------------------------------------------------------
C  Test each array before it is allocated to avoid memory leaks!
c
       IF(ALLOCATED(w))THEN
          WRITE(LP,*)'Memory Leak in zaiost! Array w allocated'
          WRITE(lp,*)'So STOP!'
          STOP
       ELSE
       n2drec=((itdm*jtdm+4095)/4096)*4096
       if     (nproc.eq.jpr) then
         iwsize=n2drec-itdm*j0
       else
         iwsize=itdm*jj
       endif

         ALLOCATE(w(iwsize),STAT=Alloc_Stat)
          IF(Alloc_Stat.NE.0)THEN
            WRITE(lp,*)'Error in Allocating array w.'
            WRITE(lp,*)'Error Cocde = ',Alloc_Stat
            STOP
          ENDIF
       ENDIF
      
       IF(ALLOCATED(wminy))THEN
          WRITE(LP,*)'Memory Leak in zaiost! Array wminy allocated'
          WRITE(lp,*)'So STOP!'
          STOP
       ELSE
          ALLOCATE(wminy(jdm),STAT=Alloc_Stat)
          IF(Alloc_Stat.NE.0)THEN
            WRITE(lp,*)'Error in Allocating array wminy.'
            WRITE(lp,*)'Error Cocde = ',Alloc_Stat
            STOP
          ENDIF
       ENDIF

       IF(ALLOCATED(wmaxy))THEN
          WRITE(LP,*)'Memory Leak in zaiost! Array wmaxy allocated'
          WRITE(lp,*)'So STOP!'
          STOP
       ELSE
          ALLOCATE(wmaxy(jdm),STAT=Alloc_Stat)
          IF(Alloc_Stat.NE.0)THEN
            WRITE(lp,*)'Error in Allocating array wmaxy.'
            WRITE(lp,*)'Error Cocde = ',Alloc_Stat
            STOP
          ENDIF
       ENDIF

       IF(ALLOCATED(htmp))THEN
          WRITE(LP,*)'Memory Leak in zaiost! Array htmp allocated'
          WRITE(lp,*)'So STOP!'
          STOP
       ELSE
          ALLOCATE(htmp(idm*jdm),STAT=Alloc_Stat)
          IF(Alloc_Stat.NE.0)THEN
            WRITE(lp,*)'Error in Allocating array htmp.'
            WRITE(lp,*)'Error Cocde = ',Alloc_Stat
            STOP
          ENDIF
       ENDIF
C===========================================================================

#if defined(TIMER)
c
c     initialize timers.
c
      call xctmrn(16,'zaio**')
      call xctmrn(17,'zaiord')
      call xctmrn(18,'zaiowr')
#endif
      return
      end subroutine zaiost

      subroutine zaiocl(iaunit)
      implicit none
c
      integer, intent(in)    :: iaunit
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array i/o file closing.
c
c     must call zaiopn for this array unit before calling zaiocl.
c
c  2) array i/o is mpi-2 i/o.
c*
c**********
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiocl)')
               stop '(zaiocl)'
      endif
c
      iarec(iaunit) = -1
c
c --- I/O from first processor in each row
c
      if     (mproc.eq.mp_1st) then
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiocl - iaunit = ',iaunit
*     call flush(lp)
*     endif
c
      call mpi_file_close(iahand(iaunit),mpierr)
c
      endif  ! I/O from first processor in each row
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif
      return
c
 9000 format(/ /10x,'error in zaiocl -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
      end subroutine zaiocl

      subroutine zaiofl(iaunit)
      implicit none
c
      integer, intent(in)    :: iaunit
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array i/o buffer flushing.
c
c     must call zaiopn for this array unit before calling zaiocl.
c
c  2) array i/o is mpi-2 i/o.
c*
c**********
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiofl)')
               stop '(zaiofl)'
      endif
c
c --- I/O from first processor in each row
c
      if     (mproc.eq.mp_1st) then
        call mpi_file_sync(iahand(iaunit),mpierr)
      endif  ! I/O from first processor in each row
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif
      return
c
 9000 format(/ /10x,'error in zaiofl -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
      end subroutine zaiofl

      subroutine zaioiq(iaunit, irec)
      implicit none
c
      integer, intent(in)    :: iaunit
      integer, intent(out)   :: irec
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array i/o inquiry.
c
c  2) returns the number of records processed, or -1 for a closed file.
c*
c**********
c
      irec = iarec(iaunit)
      return
      end subroutine zaioiq

      subroutine zaiorw(iaunit)
      implicit none
c
      integer, intent(in)    :: iaunit
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array i/o file rewinding.
c
c     must call zaiopn for this array unit before calling zaiocl.
c
c  2) array i/o is mpi-2 i/o.
c*
c**********
#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiorw)')
               stop '(zaiorw)'
      endif
c
      iarec(iaunit) = 0
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiorw - iaunit,rec = ',iaunit,iarec(iaunit)
*     call flush(lp)
*     endif
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif
      return
c
 9000 format(/ /10x,'error in zaiorw -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
      end subroutine zaiorw

      subroutine zaiord3(h, l, mask,lmask, hmin,hmax,  iaunit)
      implicit none
c
      logical, intent(in)    :: lmask
      integer, intent(in)    :: l,iaunit
      integer, dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(in)    :: mask
#if defined(REAL4)
      real*4,  intent(out)   :: hmin(l),hmax(l)
      real*4,  dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy,l),
     &         intent(out)   :: h
#else
      real,    intent(out)   :: hmin(l),hmax(l)
      real,    dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy,l),
     &         intent(out)   :: h
#endif
c
c**********
c*
c  1) machine specific routine for 3-d array reading.
c
c     must call zaiopn for this array unit before calling zaiord.
c
c  2) array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     the array, 'h',  must conform to that passed in the associated
c      call to zaiopn.
c
c  4) hmin,hmax are returned as the minimum and maximum value in the
c     array, ignoring array elements set to 2.0**100.
c     if lmask==.true. the range is calculated only where mask.ne.0,
c     with all other values unchanged in h on exit.  It is then an
c     error if mask.ne.0 anywhere the input is 2.0**100.
c*
c**********
c
c     this version just calls zaiord l times.
c
      integer k
c
      do k= 1,l
        call zaiord(h(1-nbdy,1-nbdy,k), mask,lmask,
     &              hmin(k),hmax(k), iaunit)
      enddo
c
      return
      end subroutine zaiord3

      subroutine zaiord(h, mask,lmask, hmin,hmax,  iaunit)
      implicit none
c
      logical, intent(in)    :: lmask
      integer, intent(in)    :: iaunit
      integer, dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(in)    :: mask
#if defined(REAL4)
      real*4,  intent(out)   :: hmin,hmax
      real*4,  dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(out)   :: h
#else
      real,    intent(out)   :: hmin,hmax
      real,    dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(out)   :: h
#endif
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array reading.
c
c     must call zaiopn for this array unit before calling zaiord.
c
c  2) array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     the array, 'h',  must conform to that passed in the associated
c      call to zaiopn.
c
c  4) hmin,hmax are returned as the minimum and maximum value in the
c     array, ignoring array elements set to 2.0**100.
c     if lmask==.true. the range is calculated only where mask.ne.0,
c     with all other values unchanged in h on exit.  It is then an
c     error if mask.ne.0 anywhere the input is 2.0**100.
c*
c**********
c
c --- spval  = data void marker, 2^100 or about 1.2676506e30
c --- n2drec = size of output 2-d array, multiple of 4096
c
      real*4     spval
      parameter (spval=2.0**100)
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
c
      integer(kind=mpi_offset_kind) disp
      integer                        i,j
      real*4                         wmin,wmax
      real                           rmin(1),rmax(1)
c
#if defined(TIMER)
c
      call xctmr0(17)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiord)')
               stop '(zaiord)'
      endif
c
      iarec(iaunit) = iarec(iaunit) + 1
c
      wmin =  spval
      wmax = -spval
c
c --- I/O from first processor in each row
c
      if     (mproc.eq.mp_1st) then
*
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiord - iaunit,rec = ',iaunit,iarec(iaunit)
*     write(lp,*) 'zaiord - mask.1,1    = ',amsk(1,1)
*     write(lp,*) 'zaiord - h.1,1       = ',atmp(1,1)
*     call flush(lp)
*     endif
c
      disp = n2drec
      disp = (iarec(iaunit)-1)*disp + itdm*j0
      call mpi_file_read_at(iahand(iaunit),
     &                      disp,
     &                      w(1),
     &                      itdm*jj,
     &                      MTYPE4,
     &                      mpistat(1,1),
     &                      mpierr)
      if     (mpierr.ne.0) then
        write(lp,9100) iarec(iaunit),iaunit
        write(lp,*) 'mpierr = ',mpierr
        call flush(lp)
        call xchalt('(zaiord)')
               stop '(zaiord)'
      endif !mpierr
      if     (.not.lmask) then
c       Get min and max of input array section.
c       must be done here because tiles need not cover the full domain.
!$OMP   PARALLEL DO PRIVATE(j,i)
!$OMP&           SCHEDULE(STATIC,jblk)
        do j= 1,jj
#if defined(ENDIAN_IO)
         call zaio_endian(w(1+(j-1)*itdm),itdm)  !swap to big-endian
#endif
          wminy(j) =  spval
          wmaxy(j) = -spval
          do i= 1,itdm
            if     (w(i+(j-1)*itdm).ne.spval) then
              wminy(j) = min( wminy(j), w(i+(j-1)*itdm) )
              wmaxy(j) = max( wmaxy(j), w(i+(j-1)*itdm) )
            endif
          enddo !i
        enddo !j
        wmin = minval(wminy(1:jj))
        wmax = maxval(wmaxy(1:jj))
      endif !Not Lmask
c
      endif !I/O from first processor in each row
c
C  Straight  copy of w onto htmp
c
      do j=1,jj
         do i=1,ii
            htmp(i+(j-1)*idm)=w(i+(j-1)*idm)
         end do
      end do
c
c --- Each processor loads h from htmp (where mask = 1)
c --- Each processor does local min max if lmask is true
c
      if     (lmask) then
!$OMP   PARALLEL DO PRIVATE(j,i)
!$OMP&           SCHEDULE(STATIC,jblk)
        do j= 1,jj
#if defined(ENDIAN_IO)
          call zaio_endian(htmp(1+(j-1)*ii),ii)  !swap to big-endian
#endif
          wminy(j) =  spval
          wmaxy(j) = -spval
          do i= 1,ii
            if     (mask(i,j).ne.0) then
              h(i,j) =                  htmp(i+(j-1)*ii)
              wminy(j) = min( wminy(j), htmp(i+(j-1)*ii) )
              wmaxy(j) = max( wmaxy(j), htmp(i+(j-1)*ii) )
            endif
          enddo !i
        enddo !j
        wmin = minval(wminy(1:jj))
        wmax = maxval(wmaxy(1:jj))
      else
!$OMP   PARALLEL DO PRIVATE(j,i)
!$OMP&           SCHEDULE(STATIC,jblk)
        do j= 1,jj
          do i= 1,ii
            h(i,j) = htmp(i+(j-1)*ii)
          enddo !i
        enddo !j
      endif !lmask:else
c
c --- Each processor loads h from htmp (where mask = 1)
c
c --- Min/Max broadcast/gather
c
      rmin(1) = wmin
      call xcminr(rmin)
      hmin = rmin(1)
c
      rmax(1) = wmax
      call xcmaxr(rmax)
      hmax = rmax(1)
c
      if     (lmask .and. hmax.eq.spval) then
        if     (mnproc.eq.1) then
        write(lp,9200) iarec(iaunit),iaunit
        call flush(lp)
*       cfile = ' '
*       inquire(unit=iaunit+uaoff,name=cfile)
*       write(lp,'(3a)') 'FILENAME="',trim(cfile),'"'
*       call flush(lp)
        endif !master
        call xcstop('(zaiord)')
               stop '(zaiord)'
      endif
#if defined(TIMER)
c
      call xctmr1(17)
#endif

      return
c
 9000 format(/ /10x,'error in zaiord -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
 9100 format(/ /10x,'error in zaiord -  can''t read record',
     &   i4,' on array I/O unit ',i3,'.'/ /)
 9200 format(/ /10x,'error in zaiord -  record',
     &   i4,' on array I/O unit ',i3,
     &   ' has 2.0**100 outside masked region.'/ /)
      end subroutine zaiord

      subroutine zaiosk(iaunit)
      implicit none
c
      integer, intent(in)    :: iaunit
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for skipping an array read.
c
c     must call zaiopn for this array unit before calling zaiosk.
c
c  2) array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     the array, 'h',  must conform to that passed in the associated
c      call to zaiopn.
c*
c**********
#if defined(TIMER)
c
      call xctmr0(16)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiosk)')
               stop '(zaiosk)'
      endif
c
      iarec(iaunit) = iarec(iaunit) + 1
c
*     if     (mnproc.eq.1) then
*     write(lp,*) 'zaiosk - iaunit,rec = ',iaunit,iarec(iaunit)
*     call flush(lp)
*     endif
      call xcsync(no_flush)
#if defined(TIMER)
c
      call xctmr1(16)
#endif
      return
c
 9000 format(/ /10x,'error in zaiosk -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
      end subroutine zaiosk

      subroutine zaiowr3(h, l, mask,lmask, hmin,hmax, iaunit, lreal4)
      implicit none
c
      logical, intent(in)    :: lmask,lreal4
      integer, intent(in)    :: l,iaunit
      integer, dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(in)    :: mask
#if defined(REAL4)
      real*4,  intent(out)   :: hmin(l),hmax(l)
      real*4,  dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy,l),
     &         intent(inout) :: h
#else
      real,    intent(out)   :: hmin(l),hmax(l)
      real,    dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy,l),
     &         intent(inout) :: h
#endif
c
c**********
c*
c  1) machine specific routine for 3-d array writing.
c
c     must call zaiopn for this array unit before calling zaiord.
c
c  2) array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     the array, 'h',  must conform to that passed in the associated
c      call to zaiopn.
c
c  4) hmin,hmax are returned as the minimum and maximum value in the array.
c     if lmask==.true. the range is only where mask.ne.0, with all other
c     values output as 2.0**100.
c
c  5) If lreal4==.true. then h is overwritten on exit with real*4 version
c     of the same array.  This is typically used for reproducability on
c     restart.
c*
c**********
c
c     this version just calls zaiowr l times.
c
      integer k
c
      do k= 1,l
        call zaiowr(h(1-nbdy,1-nbdy,k), mask,lmask,
     &              hmin(k),hmax(k), iaunit, lreal4)
      enddo
      return
      end subroutine zaiowr3

      subroutine zaiowr(h, mask,lmask, hmin,hmax,  iaunit, lreal4)
      implicit none
c
      logical, intent(in)    :: lmask,lreal4
      integer, intent(in)    :: iaunit
      integer, dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(in)    :: mask
#if defined(REAL4)
      real*4,  intent(out)   :: hmin,hmax
      real*4,  dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(inout) :: h
#else
      real,    intent(out)   :: hmin,hmax
      real,    dimension (1-nbdy:idm+nbdy,1-nbdy:jdm+nbdy),
     &         intent(inout) :: h
#endif
c
      integer        iarec,iahand
      common/czioxx/ iarec(999),iahand(999)
      save  /czioxx/
c
c**********
c*
c  1) machine specific routine for array writing.
c
c     must call zaiopn for this array unit before calling zaiord.
c
c  2) array i/o is mpi-2 i/o.
c
c  3) iaunit+uaoff is the i/o unit used for arrays.  array i/o might not
c      use fortran i/o units, but, for compatability, assume that
c      iaunit+uaoff refers to a fortran i/o unit anyway.
c     the array, 'h',  must conform to that passed in the associated
c      call to zaiopn.
c
c  4) hmin,hmax are returned as the minimum and maximum value in the array.
c     if lmask==.true. the range is only where mask.ne.0, with all other
c     values output as 2.0**100.
c
c  5) If lreal4==.true. then h is overwritten on exit with real*4 version
c     of the same array.  This is typically used for reproducability on
c     restart.
c*
c**********
c
c --- spval  = data void marker, 2^100 or about 1.2676506e30
c --- n2drec = size of output 2-d array, multiple of 4096
c
      real*4     spval
      parameter (spval=2.0**100)
c
      include 'mpif.h'
      integer        mpierr,mpireq,mpistat
      common/xcmpii/ mpierr,mpireq(4),
     &               mpistat(mpi_status_size,4*iqr)
      save  /xcmpii/
c
      integer(kind=mpi_offset_kind) disp
      integer                       i,j,lrec
      real                          rmin(1),rmax(1)
      real*4                        data_void(1),vsave4
c
#if defined(TIMER)
c
      call xctmr0(18)
#endif
c
      if     (iarec(iaunit).lt.0) then
        write(lp,9000) iaunit
        call xcstop('(zaiowr)')
               stop '(zaiowr)'
      endif
c
      iarec(iaunit) = iarec(iaunit) + 1
c
      data_void(1) = spval
#if defined(ENDIAN_IO)
      call zaio_endian(data_void,1) !swap to big-endian
#endif
c
c --- Copy into real*4 buffer, and find Min,Max
c
      if     (lreal4) then
        if     (lmask) then
!$OMP     PARALLEL DO PRIVATE(j,i)
!$OMP&             SCHEDULE(STATIC,jblk)
          do j= 1,jj
            wminy(j)= spval
            wmaxy(j)=-spval
            do i= 1,ii
              if     (mask(i,j).ne.0) then
                htmp(i+(j-1)*ii) = h(i,j)
                wminy(j)=min(wminy(j),htmp(i+(j-1)*ii))
                wmaxy(j)=max(wmaxy(j),htmp(i+(j-1)*ii))
              else
                htmp(i+(j-1)*ii) = spval
              endif
#if defined(REAL4)
! ---         h(i,j) = htmp(i+(j-1)*ii)  ! h is already real*4
#else
              h(i,j) = htmp(i+(j-1)*ii)  ! h is not real*4, so update it
#endif
            enddo !i
#if defined(ENDIAN_IO)
            call zaio_endian(htmp(1+(j-1)*ii),ii)  !swap to big-endian
#endif
          enddo !j
        else !.not.lmask
!$OMP     PARALLEL DO PRIVATE(j,i)
!$OMP&             SCHEDULE(STATIC,jblk)
          do j= 1,jj
            wminy(j)= spval
            wmaxy(j)=-spval
            do i= 1,ii
              htmp(i+(j-1)*ii) = h(i,j)
              if     (htmp(i+(j-1)*ii).ne.spval) then
                wminy(j)=min(wminy(j),htmp(i+(j-1)*ii))
                wmaxy(j)=max(wmaxy(j),htmp(i+(j-1)*ii))
              endif
#if defined(REAL4)
! ---         h(i,j) = htmp(i+(j-1)*ii)  ! h is already real*4
#else
              h(i,j) = htmp(i+(j-1)*ii)  ! h is not real*4, so update it
#endif
            enddo !i
#if defined(ENDIAN_IO)
            call zaio_endian(htmp(1+(j-1)*ii),ii)  !swap to big-endian
#endif
          enddo !j
        endif !lmask:else
      else !.not.lreal4
        if     (lmask) then
!$OMP     PARALLEL DO PRIVATE(j,i)
!$OMP&             SCHEDULE(STATIC,jblk)
          do j= 1,jj
            wminy(j)= spval
            wmaxy(j)=-spval
            do i= 1,ii
              if     (mask(i,j).ne.0) then
                htmp(i+(j-1)*ii) = h(i,j)
                wminy(j)=min(wminy(j),htmp(i+(j-1)*ii))
                wmaxy(j)=max(wmaxy(j),htmp(i+(j-1)*ii))
              else
                htmp(i+(j-1)*ii) = spval
              endif
            enddo !i
#if defined(ENDIAN_IO)
           call zaio_endian(htmp(1+(j-1)*ii),ii)  !swap to big-endian
#endif
          enddo !j
        else !.not.lmask
!$OMP     PARALLEL DO PRIVATE(j,i)
!$OMP&             SCHEDULE(STATIC,jblk)
          do j= 1,jj
            wminy(j)= spval
            wmaxy(j)=-spval
            do i= 1,ii
              htmp(i+(j-1)*ii) = h(i,j)
              if     (htmp(i+(j-1)*ii).ne.spval) then
                wminy(j)=min(wminy(j),htmp(i+(j-1)*ii))
                wmaxy(j)=max(wmaxy(j),htmp(i+(j-1)*ii))
              endif
            enddo !i
#if defined(ENDIAN_IO)
            call zaio_endian(htmp(1+(j-1)*ii),ii)  !swap to big-endian
#endif
          enddo !j
        endif !lmask:else
      endif !lreal4:else
c
      rmin(1) = minval(wminy(1:jj))
      call xcminr(rmin)
      hmin=rmin(1)
c
      rmax(1) = maxval(wmaxy(1:jj))
      call xcmaxr(rmax)
      hmax = rmax(1)
c
c --- I/O from first processor in each row.
#if defined(ENDIAN_IO)
c --- htmp and data_void are already big-endian
#endif
c
      vsave4 = vland4
      vland4 = data_void(1)
C============================================================================
C
C  Straight  copy of htmp onto w
c
      do j=1,jj
         do i=1,ii
            w(i+(j-1)*idm)=htmp(i+(j-1)*idm)
         end do
      end do
      vland4 = vsave4
c
C------------------------------------------------------------------
      if     (mproc.eq.mp_1st) then
        if     (nproc.eq.jpr) then
          lrec = n2drec - itdm*j0
          do i= itdm*jj+1,lrec
            w(i) = data_void(1)
          enddo      
        else
         lrec = itdm*jj
        endif 
c       WRITE(lp,*)'ZAIOWR: mnproc,itdm*jj=',mnproc,itdm*jj

C==================================================================
        disp = n2drec
        disp = (iarec(iaunit)-1)*disp + itdm*j0
c     WRITE(lp,*)'ZAIOWR:1475,mnproc,lrec,disp=',mnproc,lrec,disp
        call mpi_file_write_at_all(iahand(iaunit),
     &                         disp,
     &                         w(1),
     &                         lrec,
     &                         MTYPE4,
     &                         mpistat(1,1),
     &                         mpierr)
        if     (mpierr.ne.0) then
          write(lp,9100) iarec(iaunit),iaunit
          write(lp,*) 'mpierr = ',mpierr
          call flush(lp)
          call xchalt('(zaiowr)')
                 stop '(zaiowr)'
        endif !mpierr
      endif !I/O from first processor in each row
c
#if defined(TIMER)
c
      call xctmr1(18)
#endif 
      return
c
 9000 format(/ /10x,'error in zaiowr -  array I/O unit ',
     &   i3,' is not marked as open.'/ /)
 9100 format(/ /10x,'error in zaiowr -  can''t write record',
     &   i4,' on array I/O unit ',i3,'.'/ /)
      end subroutine zaiowr